You Are Here:  Magnetic Signs

Magnetic Signage
As Seen On Page 11 Of Our Catalog

Magnetic Signs Tri-Top Letters New Signage

   Easily transferable from one vehicle to another. Safety Industries' Magnetic Signs provide an ultra-convenient, functional means of identifying traffic safety education automobiles. Available in a range of sizes to fit every vehicle, all signs come with a warning yellow background and black lettering. You may choose from standard copy or semi-custom copy our easy-application self-spacing letters allow you to add up to 2 lines of copy to your signs. Use it to identify the name of your school, to provide dealer recognition, etc...

   Every sign is constructed of flexible, thermo-plastic permanent magnetic material that has been double polarized to provide greater holding power. See prices and sizes below. All signs are sold in pairs. Letters, to be used in conjunction with the Semi-Custom Magnetic Signs, can be seen by clicking here.

   

Student Driver
Standard Copy - 4"

6" x 24" Sign. May be split (cut) if application requires.

DVS7130 - per pair $74.95
Weight: 2 lbs.

 

Driver Education Car
Standard Copy
10" x 12" Sign. 2-1/2" Letters

DVS7115 - per pair $74.95
Weight: 2 lbs.

 

Driver Education Student Driver
Semi-Custom

3" - 2-3/4"
10" x 24" Sign. Max. of 16 characters and spaces.

DVS7117 -
per pair $99.95
Weight:
4 lbs.

 

Student Driver
Custom
Max. of 16 characters and spaces.

With Courtesy Of
DVS7118 - per pair $99.95

Weight: 4 lbs.

Without Courtesy Of
DVS7119 -
per pair $99.95

Weight: 4 lbs.

SELF-SPACING PREMIUM VINYL
LETTERS
for use on all Semi-Custom Sign Products

• Fast • Individual • 1" or 2"
• Pre-Masked
• Precise • Self-Spacing

Developed especially for customizing driver education sign products. Gloss black vinyl letters are precision die-cut to produce a sharp, uniform edge. A permanent, pressure-sensitive adhesive bonds letters to any clean, dry surface. The result a tough, weatherproof sign. (Easy-to-follow instructions included). Each character is pre masked on self-spacing carrier, easy-applications at right. To be used on all semi-custom signage:: Tri-Tops and Magnetic Signs. Order by the letter or punctuation mark.

DVS24218 - 1" Letters for /Tri-Tops
Weight 1 lb .................$0.46 each

DVS2419 - 2" Letters for Magnetic Signs
Weight 1 lb ................$0.63 each

PHONE FOR ADDITIONAL LETTERING OPTIONS

(775) 235-7711 • FAX (775) 235-7767

safetyindustries@att.net

1. Clean the surface of all oils, dirt, etc. Letters will adhere to any smooth surface.
2. Locate guides prescreened on left and right of sign. Draw a temporary guide line across sign face.
3. Before removing brown liner paper from letters, lay out and center letters on line you have just drawn. When you are pleased with spacing, mark the center letter as indicated by the center guide prescreened on sign. This is your starting point.
4. Remove paper backing from the center letter to expose the pressure sensitive adhesive
5. Position the letter marked for center on the guide line and press the letter to the surface.
6. Mount remaining letters in same manner by buffing application tapes of each letter, working to left or right from the center.
7. Burnish all letters firmly with ruler or any stiff-edged tool.
8. Peel the application tape from each letter at a 180 degree angle.

 

Home Next

 

Related Items
Magnetic Signs Tri-Top Letters New Signage